Siglent SDS2000X HD 12-bit Oscilloscopes

SIGLENT presents its first oscilloscope series with 12-bit vertical resolution
Applications from power electronics, medical technology, or the IoT often require fine vertical resolution to analyze signal anomalies. The 8-bit resolution of oscilloscopes commonly available on the market is generally insufficient to record these details. A device with 12-bit analog-to-digital conversion provides 16x more resolution and is therefore very well suited for these tasks. The maximum benefit of 12-bit resolution can only be achieved with a low-noise front end. The new SIGLENT  SDS2000X HD delivers low noise, high resolution, and many standard functions to give Engineers the tools they need to succeed.

 

SIGLENT Technologies has introduced a new 12-bit oscilloscope series. Compared to 8-bit ADCs, 12-bit systems have 16x higher vertical resolution which provides significantly lower quantization error. This improvement in resolution is valuable when analyzing the smallest signal details, and is especially useful when the zoom function is used. The analog-to-digital converters have a maximum sampling rate of 2 GS/s and all models in the series come with 4 analog input channels. All oscilloscopes are equipped with two AD converters and 2 x 200 Mpt acquisition memory. With four activated channels, this results in a minimum sampling rate of 1GS/s and a memory depth of 100 MPkt at each channel. The devices are available in bandwidths of 100, 200, and 350 MHz. If more bandwidth is required, a bandwidth upgrade option is available to expand two independent channels to 500 MHz.

The further integrated functions and features of the new series are identical to those developed for our very successful SDS2000X Plus series.

 

The following functions are included: Zone trigger, counter, totalizer, mask test, history with search function, FFT analysis with up to 2 million points, serial bus triggering and decoding for I2C, UART, SPI, LIN, CAN.
Optional decoding protocols that are available include I2S, CAN FD, FlexRay, MIL1553, SENT, and Manchester. For MSO/digital logic functionality, users can easily add the SPL2016 hardware and the appropriate software to add 16 digital measurement channels.
The sequence mode increases the waveform capture rate up to 500,000 wfm/s. This reduces the dead time of the oscilloscope by a factor of approx. 5 compared to "normal mode" and enables the developer to find rare signal anomalies more quickly.
The integrated Bode plot function, together with the optional 25 MHz function generator, enables convenient, space-saving, and cost-effective frequency analysis without additional investment in external instruments. In the development of switched-mode power supplies (SMPS), Bode plots are regularly used to measure the phase and gain margin of feedback systems to determine the stability of the design.
Like the X-Plus series, the X-HD series has a power analysis option. This enables the user to perform the most important measurements automatically and helps to determine the required power supply properties. The higher resolution increases the accuracy of the power analysis measurement and thus the analysis capability. Along with Siglent's range of current clamps and differential voltage probes, this option is a must for optimizing your SMPS designs.
The intuitive operating concept known from the previous series is also implemented. The oscilloscopes are equipped with a 10.1-inch touch screen and the operation via mouse and keyboard are supported. Remote control can be done via the built-in web server.
In summary, the SDS2000X HD series is one of the most powerful oscilloscopes on the market. The high resolution enables deeper insights into many applications and will speed your time to market. The 12-bit resolution makes this series particularly suitable for use in the areas of power electronics, medical technology, and the IoT.

 

Key Features:

  • 12-bit High Resolution
    • 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
    • Front ends with 70 μVrms noise floor @ 500 MHz bandwidth and 0.5% DC gain accuracy
  • 4 analog channels, up to 350 MHz bandwidth (upgradable to 500 MHz)
  • SPO technology
    • Waveform capture rate up to 100,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
    • Supports 256-level intensity grading and color temperature display modes
    • Up to 200 Mpts/ch record length
    • Digital trigger system
  • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). Zone Trigger simplifies advanced triggering
  • Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester
  • Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
  • History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
  • Automatic measurements on 50+ parameters, supports statistics with histogram, track, trend, Gating measurement, and measurements on Math, History and Ref
  • 2 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.), supports formula editor
  • Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot and Power Analysis
  • High Speed hardware-based Average, ERES; High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defined masks
  • 16 digital channels (optional)
  • Built-in 25 MHz waveform generator
  • Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen supports multi-touch gestures
  • Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out
  • Built-in web server supports remote control over the LAN port using a web browser. Supports SCPI remote control commands. Supports external mouse and keyboard

 

 

 

 

Or fill in the form below, to request more information.